China manufacturer Wg2229100175 Lock Plate and Base Plate for CHINAMFG CHINAMFG Truck Hw15710 Hw19710 Gearbox Part vacuum pump brakes

Product Description

Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.

 

PART(S) NUMBER

Part Name

AZ

Main Shaft Ass.

AZ

Lay Shaft-left

AZ

Lay Shaft-right

AZ

Small Cover Ass.

WG

Synchronizer Ring

WG

Double H Valve

WG220325571

Pneumatic Control Valve

WG

Pressure Switch

Q2881016F9

Set Screw

WG

Clutch Release Fork

AZ

Transmission Front Housing

AZ225711005

Transmission Middle Housing

AZ

Lay Shaft Forth Gear

WG

Idler Shaft

AZ225710040

Range Gear Subbox Ass.

WG

Planetary Rack

AZ

Output Shaft

WG

Fork Pendulum Block

WG

Range Block Cylinder

WG225710009

Odometer Connector Ass.

AZ

Transmission Back Housing

WG

Synchronous Push Block

WG

Planetary Wheel

WG

Input Shaft End Cap

WG

Support Rod Ass.

WG

Sensor Drive Ring

AZ

Shift Head

WG

Gear Selection Support Shaft

WG

Oil Pump Ass.

Female Screw

 

 

Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.

 

 

 

 

Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CHINAMFG is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.

Main product:

Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CHINAMFG truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.

Overseas market at present:

Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.

We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!

Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.

Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.

Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.

Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.

Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Car, Truck
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Optional
Step: Optional
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

motor base

Are there standard dimensions for motor bases, or are they customizable?

Motor bases can have both standard dimensions and customizable options, depending on the specific requirements of the motor and the application. Here’s a detailed explanation:

1. Standard Dimensions: Motor bases often follow industry standards for certain motor sizes. These standardized bases have predefined dimensions that correspond to specific motor frame sizes. For example, the National Electrical Manufacturers Association (NEMA) provides guidelines and standards that define the dimensions and mounting configurations for various motor frame sizes. These standards ensure compatibility and ease of interchangeability between motors and motor bases within the same frame size category.

Standard motor bases typically have specific hole patterns, bolt sizes, and mounting dimensions that align with the corresponding motor frame size. This allows for straightforward and consistent installation of motors using standard bases. Standardization provides convenience, simplifies sourcing and replacement of motor bases, and ensures compatibility with a wide range of motor manufacturers.

2. Customizable Options: In addition to standard dimensions, motor bases can also be customized to suit specific requirements. Customization allows for flexibility in adapting the base to unique motor sizes, mounting configurations, or application constraints. Manufacturers may offer customization options that include variations in dimensions, hole patterns, mounting features, and material choices.

Customizable motor bases are particularly useful when dealing with non-standard motor sizes, specialized mounting requirements, or unique application environments. By tailoring the motor base to specific needs, it’s possible to optimize the installation, ensure proper alignment, and accommodate space limitations.

When choosing between standard or customizable motor bases, it’s important to consider factors such as motor frame size, load capacity, mounting options, environmental conditions, and any specific installation constraints. Standard bases are readily available, cost-effective, and suitable for most applications that adhere to standard motor sizes. On the other hand, customizable bases offer flexibility and fine-tuning options for non-standard or specialized installations.

In summary, motor bases can have standard dimensions based on industry guidelines and standards, such as those provided by NEMA. These standardized bases ensure compatibility between motors and motor bases within the same frame size category. However, motor bases can also be customized to accommodate non-standard motor sizes, unique mounting requirements, or specific application constraints. Customization options allow for flexibility and optimization of the motor base to meet specific needs.

motor base

What role does corrosion resistance play in the selection of motor bases?

Corrosion resistance plays a crucial role in the selection of motor bases. Here’s a detailed explanation:

1. Protection of Motor Base: Motor bases are often exposed to various corrosive agents such as moisture, chemicals, saltwater, or industrial gases. Corrosion-resistant motor bases are designed to withstand these corrosive environments and prevent the deterioration of the base material. By selecting a corrosion-resistant motor base, you can ensure its durability and longevity, reducing the risk of premature failure or structural damage.

2. Preservation of Aesthetic and Functional Appearance: Corrosion can impact the aesthetic appearance of the motor base, causing discoloration, rust, or pitting. However, corrosion resistance helps maintain the visual appeal of the motor base over time. Additionally, corrosion can compromise the functionality of the motor base by weakening its structural integrity or hindering its adjustability features. By choosing a corrosion-resistant motor base, you can preserve both the aesthetic and functional aspects of the base.

3. Protection of Surrounding Equipment: Corrosion can extend beyond the motor base itself and affect other components or equipment in the vicinity. For example, if a corroded motor base transfers rust or contaminants to connected equipment, it can lead to operational issues or premature failure of those components. Opting for a corrosion-resistant motor base helps protect the surrounding equipment and ensures the smooth operation and reliability of the entire system.

4. Improved Maintenance Efficiency: Corrosion-resistant motor bases require less frequent maintenance and repair. They are less prone to degradation, which reduces the need for regular inspections, cleaning, and surface treatments. This not only saves time and effort but also minimizes maintenance costs associated with corrosion-related issues.

5. Environmental Compatibility: Industries or applications that involve exposure to corrosive environments, such as coastal areas, chemical plants, or wastewater treatment facilities, require motor bases that can withstand these conditions. Corrosion-resistant motor bases are designed to meet the specific environmental challenges and provide reliable performance in such demanding settings.

6. Long-Term Cost Savings: Although corrosion-resistant motor bases may have a higher initial cost compared to standard bases, they offer long-term cost savings. By investing in a high-quality corrosion-resistant motor base, you can mitigate the expenses associated with premature replacement, repairs, and downtime caused by corrosion-related issues.

When selecting a motor base, consider the environmental conditions, exposure to corrosive agents, and the expected service life of the motor base. Consult with manufacturers or suppliers to identify corrosion-resistant options that are compatible with the specific application requirements. They can provide guidance on suitable materials, coatings, or finishes that offer optimal corrosion resistance for your motor base.

motor base

Can motor bases be used for both horizontal and vertical motor installations?

Yes, motor bases can be used for both horizontal and vertical motor installations, depending on the design and configuration of the motor base. Here’s a detailed explanation:

Motor bases are versatile components that provide a stable mounting platform for electric motors in various orientations. The suitability of a motor base for horizontal or vertical motor installations depends on the specific design features of the base. Here are some considerations:

1. Adjustable Mounting Slots: Many motor bases feature adjustable mounting slots that allow for flexibility in positioning the motor. These slots enable technicians to mount the motor in either a horizontal or vertical orientation by adjusting the position of the mounting bolts. Adjustable mounting slots provide versatility and allow for easy adaptation to different installation requirements.

2. Rotatable Base Plates: Some motor bases are designed with rotatable base plates that can be repositioned to accommodate both horizontal and vertical installations. These bases often have multiple sets of mounting holes or slots on different sides of the base plate, allowing for easy reorientation of the motor. By rotating the base plate, the motor can be securely mounted in the desired orientation.

3. Specific Base Design: Certain motor bases are specifically designed for either horizontal or vertical installations. These bases have fixed mounting patterns or configurations that align with the intended motor orientation. For example, vertical motor bases may have a taller or elongated design to provide proper support and stability when the motor is installed vertically.

It’s important to note that not all motor bases are suitable for both horizontal and vertical installations. Some motor bases may be designed exclusively for either horizontal or vertical orientations due to their specific structural features or limitations. Therefore, it’s essential to consult the manufacturer’s guidelines and specifications to ensure that a particular motor base is appropriate for the desired installation orientation.

In summary, motor bases can be used for both horizontal and vertical motor installations, depending on the design and configuration of the base. Adjustable mounting slots, rotatable base plates, and specific base designs are some of the features that enable motor bases to accommodate different installation orientations. However, it’s crucial to verify the suitability of a motor base for a specific orientation by referring to the manufacturer’s guidelines.

China manufacturer Wg2229100175 Lock Plate and Base Plate for CHINAMFG CHINAMFG Truck Hw15710 Hw19710 Gearbox Part   vacuum pump brakesChina manufacturer Wg2229100175 Lock Plate and Base Plate for CHINAMFG CHINAMFG Truck Hw15710 Hw19710 Gearbox Part   vacuum pump brakes
editor by CX 2024-04-17

Motor base

As one of leading motor base manufacturers, suppliers and exporters of mechanical products, We offer motor base and many other products.

Please contact us for details.

Manufacturer supplier exporter of motor base

Recent Posts