.75Kw crane motor stop carriage driven motor 6P
.75Kw crane motor end carriage driven motor 6P breif introduction:
| Gearbox | cast iron(FC25) material, high tension, high precision. |
| Gear | Ni-Cr-Mo alloy steel(SNCM220&SCM415) with heat treatment of vacuum carbonitriding. |
| Shaft | alignment and grinding, high accurate, high abrasion and strike resistance, up 5 times safety factor,long service life. |
| Buffer |
adopt soft starting and flywheel, make start and brake stable, smooth and not shake, |
| Motor |
easy heat dissipation, good high voltage resistance, low noise, high performance, |
| Electromagnetic brake |
Strong braking force, bolt control braking force directly, braking pad high wear |
.75Kw crane motor conclude carriage driven motor 6P dimensions:
.75Kw crane motor conclude carriage pushed motor 6P Parameters:
| Design | Electrical power | Number of poles | Output equipment Module | Reduction ratio | Rotation pace | Voltage | |
| KD-a hundred and fifty with buffer |
1.1Kw | 4P | M3.5,M4,M5 | 13:1 | 112R/min(50Hz) | 135R/min(60Hz) | 200-600V/3Phase |
| .75Kw | 6P | 67R/min(50Hz) | 92R/min(60Hz) | ||||
| .six/.2Kw | four/12P | 112/33R/min(50Hz) | 137/45R/min(60Hz) | ||||
| KD-a hundred and fifty | M3.5 | Tooth | 15T | 16T | 18T | 20T | 22 | 24T |
Reduction ratio:thirteen :one Output shaft:112Rotate |
| Speed | 16.6m/min | seventeen.7m/min | 19.9m/min | 22m/min | 24.3m/min | 26.5m/min | |||
| M4 | Enamel | 14T | 15T | 16T | 17T | 18T | 20T | ||
| Velocity | seventeen.9m/min | 19.2m/min | 20.5m/min | 21.8m/min | 23.1m/min | 25.5m/min | |||
| M5 | Enamel | 12T | 13T | 14T | 15T | 16T | 17T | ||
| Velocity | 19.7m/min | 21.4m/min | 23m/mim | 24.7m/min | 26.3m/min | 28m/min |
.75Kw crane motor finish carriage driven motor 6P Application:
.75Kw crane motor finish carriage driven motor 6P functions:
